Diverting Calls; Calls Firewall - Zte WP623 User Manual

5.3 Diverting Calls

Use Diverts to forward an incoming call to a preset designated phone
number. After setting of call forwarding, phone will automatically dial
network to set the function in active.
Note: This function needs network support. Please consult with network
service provider to get corresponding service application.
Setting Calls Divert
You can set divert type under different circumstances.
1. Select Menu→ Phone Menus→ Diverts.
2. Set types of divert, press MENU/SELECT key.
Divert Always (Divert unconditionally): Divert in all conditions.
When Busy (Divert when busy): When the phone is busy,
divert.
No Reply (Divert when no answer): When there is no answer,
divert.
Unreachable: (Divert when unreachable): When the call can
not reach the recipient, divert.
3. Select "On" to activate your setting or "Off" to cancel your
setting; Select Status Check to see whether Divert is activated;
4. Select one type to forward service selected to preset designated
phone number in By Service as follows
All Services: Divert all services, such as, voice call and short
message, etc.
Voice Calls: Divert voice call.
Data: Divert data only.
Fax: Divert fax only.
Messages: Divert short message only.
All Except Msgs: Divert all except for short message.
Cancel All Divert
1. Select Menu→ Phone Menus→ Diverts.
2. Set type of divert as Cancel All to cancel all calls' divert setting,
and then press MENU/SELECT key to confirm.

5.4 Calls Firewall

You can set Incoming Calls Bar in Firewall submenu including Friend
List, Black List, Current Settings.
Friend List
All the contacts will be list by the letter of the name. If there is no contact
26