If The Network Blaster 2030-01 Setup Dialog Box Does Not Appear - Creative Blaster 2030 User Manual

If the Network
Blaster 2030-01
Setup dialog box
does not appear
In Windows 2000/XP
1. Click the Start button and click Run.The Run dialog box appears.
2. In the Open box, type command.
3. At the command prompt, type ipconfig.
4. Press the Enter key.
5. Restart your computer.
Radio Interference.
Do the following:
❑ Adjust the antennas of the wireless access point until you get the best reception.
❑ Keep the access point and wireless clients away from microwave ovens, large
metal objects and 2.4 GHz cordless phones.
❑ If possible move the access point from its present location to another location
until you get the best reception.
Do the following:
❑ Go to the Start menu
❑ Click on the Run command
❑ Type in E:\wlsetup.exe (where E: can be replaced by the actual drive letter
assigned to your CD-ROM) in the prompt.
❑ Click the OK button.
Troubleshooting B-4