Toshiba Satellite X200; Satellite X205 Maintenance Manual page 176

4.15 Top Cover
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding
section.
1. Seat the top cover, and secure the speaker cables, Bluetooth cable, fingerprint unit FFC
cable, and touch pad unit FFC cable to the system board.
2. Secure the top cover with two M2.5x6 screws, four M2.5x8 screws, and one M2.5x20
screw.
3. Turn the computer upside down and secure fourteen M2.5x8 screws, four M2.5x4
screws, and one M2.5x3 screw.
Satellite X200/ X205 Series Maintenance Manual
[CONFIDENTIAL]
4 Replacement Procedures
4-41