Serial Port 4 Clock Configuration Select Headers J6 And J7 - Motorola MVME167 Series User Manual

Hardware Preparation and Installation

Serial Port 4 Clock Configuration Select Headers J6 and J7

2
Serial port 4 can be configured to use clock signals provided by the RTXC4 and
TRXC4 signal lines. Headers J6 and J7 on the MVME167 configure serial port 4 to
drive or receive RTXC4 and TRXC4, respectively. Factory configuration is with port
4 set to receive both signals.
The remaining configuration of the clock lines is accomplished using the Serial Port 4
Clock Configuration Select header on the MVME712M transition module. Refer to the
MVME712M Transition Module and MVME147P2 Adapter Board User's Manual for
configuration of that header
2-4
J6
1
3
Receive RTXC4
(Factory Configurations)
J6
1
3
Drive RTXC4
J7
1
3
Receive TRXC4
J7
1
3
Drive TRXC4
MVME167 Single Board Computer User's Manual