End Of The Programme - Zanussi ZWR 270 Instruction Book

4.2.8. End of the programme

When the chosen programme is over, the washing machine
stops automatically and the programme selector stays on
the stop « » or «rinse hold» position ( ).
The programmes end :
• by a spinning (for all the washing programmes) if you
have not pressed the «rinse hold» pushbutton.
• by a rinse hold (for all the washing programmes) if you
have selected the rinse hold pushbutton. You can finish
these programmes either by a spinning by releasing the
rinse hold pushbutton, either by a draining, by releasing
the rinse hold pushbutton, by selecting the draining pro-
gram and taking care to release the on/off pushbutton
before doing your choice.
At the end of the cycle, allow the On/Off pushbutton to come
out to switch the washing machine off. Release any other
pushbuttons that are pressed in. Pull out the electricity plug
and close the water supply tap.
Note: we recommend that you should leave the cover and
the drum open after use to air the washing drum.
4