Zanussi ZWS 744 Instruction Booklet page 9

Loading your machine
Before placing dishes in the machine, remove any
scraps of food from the plates (small bones,
toothpicks, fish bones, scraps of meat and vegetables,
fruit skins etc.) to avoid clogging the filters and
consequently reducing performance.
Open the door and slide out the baskets to load the
dishes.
Use of the lower basket
The lower basket is designed to take saucepans, lids,
plates (up to 27 cm in diameter), salad bowls, cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the
upper spray arm can turn freely.
IEC 436 / DIN 44990
UI23
UI24
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upward.
UI10
Mix spoons with the other
cutlery to prevent them
sticking together.
Teaspoons may be loaded
into the special slots
provided in the cutlery
basket handle.
The two rear rows of prongs on the lower basket can
be easily lowered to allow you to load pots, pans and
bowls.
UI18
Use of the upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates up to 24 cm in diameter), salad
bowls, cups and glasses; these should be
arranged as shown in the pictures. Glasses with long
stems can be placed upside-down in the raised cup-
racks.
US08
US07
The cup-rack on the left folds upwards to increase
your loading flexibility.
Before closing the door, ensure that the spray
arms can rotate freely.
PCE12GB
9
To lower the prongs:
slightly pull them upward
and let them drop down
(see picture); to bring them
back to the standing posi-
tion, just pull them up
again.
IEC 436 / DIN 44990