Yamaha RX10K Owner's Manual page 76

ESU01911
Ski spring preload adjustment
The spring preload can be adjusted by turning the spring
preload adjuster 1.
For RX10/RX10R/RX10RS
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
For RX10M/RX10MS
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
For RXW10/RXW10S
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
CAUTION :
@
The left and right ski spring preload must be set to
the same setting. Uneven settings can cause poor
handling and loss of stability.
@
8-21
Standard
Increased ←
←
Harder
Maximum
156.6 mm 148.6 mm
(6.17 in) (5.85 in)
Standard
Increased ←
←
Harder
Maximum
144.6 mm 134.6 mm
(5.69 in) (5.30 in)
Standard
Increased ←
←
Harder
Maximum
158.6 mm 148.6 mm
(6.24 in) (5.85 in)
→ Decreased
→
Softer
Minimum
146.6 mm
(5.77 in)
→ Decreased
→
Softer
Minimum
134.6 mm
(5.30 in)
→ Decreased
→
Softer
Minimum
148.6 mm
(5.85 in)