Care And Maintenance; Useful Tips - Binatone SI-5000 I-Flash Instruction Manual

6 ) When you have finished cleaning or ironing, do not forget to
switch the iron off. Set the Select knob to the position «
set the Display Fabric Settings (9)
plug the appliance from the mains supply outlet.

CARE AND MAINTENANCE

materials to clean the sole plate.
SI-5000 I-Flash SI-5000 I-Flash SI-5000 I-Flash SI-5000 I-Flash iron is equipped with an anti-scale func- SI-5000 I-Flash
tion which protects it from an accumulation of scale: it does this with
a built-in permanent filter. Therefore the water hardness is reduced
and the useful service life of the iron is extended.
Warning: In areas with very hard water it is recommended
that you regularly remove scale from the appliance to
maintain it in good working order. Excess lime scale
may result in damage or malfunction of your product.
If in your area the water is soft and you have average amounts
of clothes to be ironed then we recommend you to de-scale every 6
months (see subsection «Self-Cleaning
area is very hard or if you iron frequently, then we recommend you
de-scale once a month.
Before storing the iron, make sure it is disconnected from the
mains supply outlet and is completely cooled down. Drain the re-
maining water from the tank (5)
holding the iron upside down over the sink. Store the appliance in
the upright standing position. The recommended storage tempera-
ture is from +5 to +50°C.

USEFUL TIPS

Selection of temperature settings
! Before ironing, we recommend that you orga-
! We recommend that you start ironing, using the
! When ironing articles made with combinations of fibers, start
with the temperature recommended for the most delicate mate-
rial first (for example, to iron a cloth made of cotton and polyester
select the temperature recommended for ironing polyester first).
! If the manufacturer's label, which gives the recommended tem-
(9) to the position « (9) (9)
(9)
Cleaning of the sole plate
Do not use any abrasive substances and
Cleaning of internal parts of the
appliance
Self-Cleaning Self-Cleaning»). If the water in your Self-Cleaning
Self-Cleaning
Storage
(5) (5)
(5) by opening the cover (4) (5)
nize your clothes, into the types of material and
the recommended temperature settings.
lower temperature settings first: the appliance
gets hot quicker than it cools down.
8 8 8 8 8
» and
». Un-
(4) (4)
(4) (4) and