EBU18442
Brake pedal and rear brake lever
The brake pedal is located on the right side of the
ATV and the rear brake lever is located on the left
handlebar. To apply the rear brake, push down on
the brake pedal or pull the brake lever toward the
handlebar grip.
1. Brake pedal
1. Rear brake lever
EBU18611
Drive select lever
The drive select lever is used to shift your ATV into
the low-range, high-range, neutral, reverse and
park positions. See the "Operating the drive select
lever and driving in reverse" section on page 6-3
for the drive select lever operation.
4-14
4