To set the clock
1. Set the display to the clock mode.
2. Push the "
"/" " button until the clock starts
flashing.
3. Set the hours by pushing the "H" button.
4. Set the minutes by pushing the "M" button.
5. Push the "
"/" " button, and then release it
to start the clock.
4
EBU18050
Fuel gauge
The fuel gauge indicates the amount of fuel in the
fuel tank. When the needle reaches the red line, re-
fill the tank at the first opportunity.
1. Fuel gauge
2. Red line
NOTE:
If the ATV runs out of fuel, move the fuel cock lever
to the "RES" position. Approximately 4.5 L (1.19
US gal) (0.99 Imp.gal) of fuel will be remaining in
the tank.
EBU18060
Handlebar switches
1. Light switch "
/
2. Start switch "
"
3. Engine stop switch "
4. Override switch "OVERRIDE"
4-5
/OFF"
/
"