Removing A Wheel; Installing A Wheel - Yamaha GRIZZLY 450 Owner's Manual

1. Tail/brake light bulb holder
2. Tail/brake light bulb
4. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
5. Install the bulb holder (together with the bulb)
by turning it clockwise.
6. Install the tail/brake light assembly by install-
ing the washers and the nuts.
EBU25650

Removing a wheel

1. Loosen the wheel nuts.
1. Wheel nut
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU25700

Installing a wheel

1. Install the wheel and the nuts.
NOTE:
G
The arrow mark
the rotating direction of the wheel.
8-56
on the tire must point toward
8