Replacing The Fuse; Replacing A Headlight Bulb - Yamaha Grizzly YFM125GW Owner's Manual

Table of Contents

Advertisement

EBU25252

Replacing the fuse

1
2
3
4
5
6
1
7
1. Fuse
8
2. Spare fuse
9
The fuse holder is located on the right side of the
ATV.
10
If the fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off all electrical
11
circuits.
ECB00640
CAUTION:
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
Specified fuse:
2
EWB02151
POTENTIAL HAZARD
Using an improper fuse.
WHAT CAN HAPPEN
An improper fuse can cause damage to the
electrical system, which could lead to a fire.
HOW TO AVOID THE HAZARD
Always use a fuse of the specified rating.
Never use a material in place of the proper
fuse.
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU25350

Replacing a headlight bulb

If a headlight bulb burns out, replace it as follows.
8-44
15.0 A
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grizzly 125

Table of Contents