1
1
2
3
4
5
6
1. Tail/brake light bulb
2. Tail/brake light bulb holder
7
3. Insert a new bulb into the bulb holder, push it
8
in, and then turn it clockwise until it stops.
4. Install the bulb holder (together with the bulb)
9
by turning it clockwise.
10
EBU25650
Removing a wheel
11
1. Loosen the wheel nuts.
2
1. Wheel nut
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU25690
Installing a wheel
1. Install the wheel and the nuts.
NOTE:
Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
8-48
1
1