Indicator And Warning Lights - Yamaha BIG BEAR 4X4 Owner's Manual

EBU00802

Indicator and warning lights

1. Reverse indicator light "REVERSE"
2. Neutral indicator light "NEUTRAL"
3. Oil temperature warning light "
4. Four-wheel drive indicator light "
EBU00044
Reverse indicator light "REVERSE"
This indicator light comes on when the trans-
mission is in reverse.
EBU00045
Neutral indicator light "NEUTRAL"
This indicator light comes on when the trans-
mission is in neutral.
"
"
4-2
EBU01140
Oil temperature warning light "
When the oil temperature reaches a specified
level, this light comes on to warn that the en-
gine oil temperature is too hot. If the light
comes on during operation, stop the engine
as soon as it is safe to do so and allow the en-
gine to cool down for about 10 minutes.
CAUTION:
_
The engine may overheat if the ATV is
G
overloaded. If this happens, reduce
the load to specification.
G Restart after making sure that the light
is out. Continuous use while the light
is on may cause damage to the en-
gine.
_
EBU00605
Four-wheel-drive indicator light " "
This indicator light comes on when the 2WD/
4WD switch is in the 4WD position.
NOTE:
Due to the synchronizing mechanism in the
differential gear case, the light may not come
on until the ATV starts moving.
"
1
2
3
4
5
6
7
8
9
10
11
12
13
14