Multi-Function Display - Yamaha NEO'S YN50 Owner's Manual

Multi-function display

1 2 3
5
4
1. Digital clock
2. Digital speedometer
3. Fuel meter
4. Odometer/tripmeters
5. Button
NOTE:
The multi-function display performs
the following self-test for three
seconds in order to check the electri-
cal circuit.
G
The speedometer digits display
from 0 to 99, and then from 99 to
0 in kilometers. If the speedome-
ter is set to miles, the digits dis-
play from 0 to 65, and then from
65 to 0.
INSTRUMENT AND CONTROL FUNCTIONS
G
EAUS1391 All LCD segments and warning
lights come on and then go off.
s WARNING
s
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
The multi-function display is equip-
ped with the following:
G a digital clock
G
a digital speedometer (which
shows riding speed)
G
an odometer (which shows the
total distance traveled)
G a tripmeter (which shows the dis-
tance traveled since it was last
set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled on
the fuel reserve)
G
a fuel gauge
G a self-diagnosis device
NOTE:
G
G
EWA12311
To set the clock:
1. Select the odometer and push
2. When the hour digits start flas-
3-3
Be sure to turn the key to "f"
before using the button.
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilome-
ters and miles, when the main
switch is turned to "f", press
the button for at least eight
seconds.
the button for at least three
seconds.
hing, push the button to set the
hours.
3