Yamaha NEO'S YN50 Owner's Manual page 18

INSTRUMENT AND CONTROL FUNCTIONS
3. To change the minutes digits,
push the button for at least three
seconds.
4. When the minutes digits start
flashing, push the button to set
the minutes.
3
5. Push the button for at least three
seconds to start the clock.
NOTE:
After setting the clock, be sure to
push the button for at least three
seconds before turning the key to
"e", otherwise the clock will not be
set.
Odometer and tripmeter modes
Pushing the button switches the dis-
play between the odometer mode
"ODO" and the tripmeter "TRIP" in
the following order:
ODO TRIP ODO
1
PRESS
BUTTON
PRESS
BUTTON
1. Odometer
2. Tripmeter
If the fuel level warning indicator
comes on (see page 3-2), the odome-
ter display will automatically change
to the fuel reserve tripmeter mode
"TRIP F" and start counting the dis-
tance traveled from that point. In that
case, pushing the button switches the
display between the various tripmeter
and odometer modes in the following
order:
TRIP F ODO TRIP
3-4
1
PRESS
BUTTON
2
BUTTON
1. Fuel reserve tripmeter
2. Odometer
3. Tripmeter
To reset a tripmeter, select it by pus-
hing the button, and then push it
again for at least three seconds. If you
do not reset the fuel reserve tripmeter
manually, it will reset itself automati-
cally and the display will return to the
prior mode after refueling and trave-
ling 5 km (3 mi).
NOTE:
The display cannot be changed back
to "TRIP F" after pushing the button.
TRIP F
2 3
PRESS
BUTTON
PRESS