Procedure For Tilting Down (Power Trim And Tilt Models / Power Tilt Models); Cruising In Shallow Water; Power Trim And Tilt Models / Power Tilt Models - Yamaha VZ150 Owner's Manual

Operation
sure.
5. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch / power tilt switch "
(down) to retract the trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU28055
Procedure for tilting down (power
trim and tilt models / power tilt
models)
1. Push the power trim and tilt switch / pow-
er tilt switch "
motor is supported by the tilt rod and the
tilt support lever / tilt support knob be-
comes free.
2. Release the tilt support lever or pull out
the tilt support knob.
46
ZMU03997
" (up) until the outboard
"
3. Push the power trim and tilt switch / pow-
er tilt switch "
board motor to the desired position.
DN
EMU28060

Cruising in shallow water

The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU28090
Power trim and tilt models / power tilt
models
The outboard motor can be tilted up partially
ZMU03998
" (down) to lower the out-
UP
DN
ZMU01936
DN
ZMU03999