Troubleshooting - Yamaha V-star XVS650S Owner's Manual

7. Tighten the axle nut, the final gear
case bolts and the brake torque
rod bolt to the specified torques.
Tightening torques:
Axle nut:
92 Nm (9.2 m·kgf, 67 ft·lbf)
Final gear case bolt:
74 Nm (7.4 m·kgf, 54 ft·lbf)
Brake torque rod bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
8. Adjust the brake pedal free play.
(See page 6-21.)
WARNING
After adjusting the brake pedal free
play, check the operation of the
brake light.
PERIODIC MAINTENANCE AND MINOR REPAIR

Troubleshooting

Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting chart
represents a quick and easy procedure
for checking these vital systems your-
self. However, should your motorcycle
EWA10660 require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look like
Yamaha parts, but they are often inferi-
or, have a shorter service life and can
lead to expensive repair bills.
EAU25850
6-36
6