Helmet Holder; Adjusting The Shock Absorber Assemblies - Yamaha VIRAGO XV250S Owner's Manual

1. Projection
2. Seat holder
2. Place the rider seat in the original
position, and then tighten the bolts.
NOTE:
Make sure that the rider seat is properly
secured before riding.
INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
3-9
EAU14280
Adjusting the shock absorber
assemblies
1. Spring preload adjusting ring
2. Position indicator
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
CAUTION:
EWA10160
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
EAU14880
3
ECA10100