Clutch Lever - Yamaha VIRAGO XV250S Owner's Manual

Dimmer switch "LIGHTS"
Set the switch to "HI" for the high beam
and to "LO" for the low beam.
Turn signal switch "TURN"
To signal a right-hand turn, push this
switch to the right. To signal a left-hand
turn, push this switch to the left. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "HORN"
Press this switch to sound the horn.
Engine stop switch "ENGINE STOP"
Set this switch to "RUN" before starting
the engine. Set this switch to "OFF" to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch "START"
Push this switch to crank the engine
with the starter.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12410
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12440
EAU12510
EAU12650
EAU12690
ECA10050

Clutch lever

1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-11.)
3-3
EAU12820
3