Scanning From The Basic Interface - Xerox DOCUMATE 262 User Manual

Scanning from the Basic Interface

DocuMate 262 Scanner User's Guide
The Basic Interface can scan a preview of the image so you can
adjust its appearance before scanning the final image. After
adjusting the appearance, you click the Scan button on the Basic
Interface (not on the scanner) to scan the item.
Click the Advanced Interface button if
you would rather scan with the
Advanced Interface.
1. From the Scan Type menu, choose the option to scan Simplex
(one-sided) or Duplex (two-sided).
2. Choose the color, grayscale, or black and white option from the
Picture Type menu.
NOTE: If you want to preview the document before scanning,
make sure only one page is loaded into the scanner.
3. Click the Preview button.
The scanner scans the item and displays a preview image. You
can now use the options on the Basic Interface to adjust the
image.
NOTE: If you want to preview for a stack of pages, use one of
the pages as a test page and load it into the scanner. Click the
Preview button and adjust the scanner settings. Then replace
the page on the stack at its original position and load the stack
into the scanner. Then just click the Scan button.
4. Adjust the brightness, contrast, and resolution until the picture
is what you want.
You can also change the picture type again, for example, from
color to grayscale.
Scanning from PaperPort
69