Selecting Settings - Xerox DOCUMATE 262 User Manual

Scanning from PaperPort
66
3. From the Scanner list, choose Xerox DocuMate 262.
4. In the "Scan what?" section, choose to scan a Document or
Photograph.
If you want to change the format of the scanned item's file
name or file type before you start scanning, click Settings. The
default file type for documents is .pdf and the default for
photographs is .jpg.
5. Use the Single page items check box as follows:
• When the check box is selected, all pages in the automatic
document feeder are scanned and placed as single pages
on the PaperPort desktop.
• When the check box is not selected, all pages in the
automatic document feeder are scanned, but not placed on
the PaperPort desktop until you indicate the scanning job is
finished by clicking Done on the PaperPort-Scan window.
6. Click the Scan button on the Scan pane.
The Basic Interface opens and you're ready to start scanning.
7. If you haven't put the document into the scanner's paper guide,
do it now.
NOTE: If you used the Advanced Interface the last time you
scanned from PaperPort, it will open instead.
NOTE: You can also open the Basic Interface and Advanced
Interface from the PaperPort ScanDirect application.

Selecting Settings

Clicking the Settings option on the PaperPort Scan panel displays
the Settings dialog box where you can change the naming of
scanned items and their file type.
DocuMate 262 Scanner User's Guide