Edit A Number/Name Stored In Memory; Delete A Number/Name Stored In The Directory - VTech Cordless Telephone Manual

Telephone Directory
7 Press or to change the setting. Choose
alert you to calls from this number by changing to a distinctive ringing pattern
after the first ring. Choose
8 Press SELECT or PROG/CHAN to confirm your selection. If you chose Y in
Step 7,a will be displayed with the directory entry.
Note: When memory is full the screen displays
sounds, and you will not be able to store a new number until you delete a stored
number.
Edit a Number/Name Stored in the Directory
1 Press ( ). The screen displays
2 Press or to scroll alphabetically through entries stored in memory
— OR —
Press the dial pad key for the first letter of the entry you want to edit.
When the screen displays the number you want to edit, press SELECT .
3
Then press until
EDIT
4 Press SELECT . The screen displays the name and number. The flashing cursor
appears at the end of the name. Use
Press SELECT to move on to edit the number.Use
corrections. Press SELECT to move to edit the Distinctive Ring setting.
5 Press SELECT to save the edited information.

Delete a Number/Name Stored in the Directory

1 Press ( ). The screen displays
2 Press or to scroll alphabetically through entries stored in memory
— OR —
Press the dial pad key for the first letter of the entry you want to delete.
3 When the screen displays the number you want to delete, press SELECT .
Then press until
ERASE
4 Press SELECT . The screen displays
The current choice flashes.
5 Press until
6 Press SELECT . You'll hear a long beep confirming the deletion.
(No) for a normal ringing pattern.
flashes.
, and the dial pad keys to edit the name.
flashes.
flashes.
17
(Yes) if you wish the phone to
, an error tone
.
to backspace and make
.
and the number.