Audio Setup Page; Video Setup Page - VIETA VMD600 Owner's Manual

Audio Setup Page

Audio Setup Page
Audio Setup Page Audio Setup Page Audio Setup Page

Video Setup Page

Video Setup Page Video Setup Page
Video Setup Page Video Setup Page
w w w w w Digital Output
Digital Output Digital Output
Digital Output Digital Output
You can choose output mode when
playing different disc.
Off --- Turns off the SPDIF output.
All --- If you have connected your
DIGITAL OUT (COAXIAL) to a
multi-channel decoder/receiver.
PCM only --- Only if your receiver is not
capable of decoding multi-channel
audio.
w w w w w DUAL MONO
DUAL MONO DUAL MONO DUAL MONO
DUAL MONO
Select the setting that matches the
number of speakers you have
connected.
STEREO --- Left mono sound will send
output signals to Left speaker and Right
mono sound will send output signals to
Right speaker.
L-Mono --- Left mono sound will send
output signals to Left speaker and Right
speaker.
R-Mono --- Right mono sound will send
output signals to Left speaker and Right
speaker.
w w w w w Reverb Mode
Reverb Mode Reverb Mode Reverb Mode Reverb Mode
Reverb mode provides a virtual surround
sound experience using just two
speakers.
w w w w w H D C D
H D C D H D C D
H D C D H D C D
Set the audio output cut off frequency
point when playing an HDCD disc.
w w w w w Night Mode
Night Mode Night Mode Night Mode Night Mode
In this mode, the high volume outputs
are softened and low volume outputs
are brought upward to an audible level.
It is useful for watching your favourite
action movie without disturbing others at
night.
w w w w w Component
Component Component
Component Component
Sets the video output according to your
video connection. This setting is not
required if you are using the VIDEO
21