Audio Setup Page; Video Setup Page - VIETA VMD650IP Owner's Manual

Audio Setup Page

Audio Setup Page
Audio Setup Page Audio Setup Page Audio Setup Page

Video Setup Page

Video Setup Page Video Setup Page
Video Setup Page Video Setup Page
Š
Analog Audio Setup Analog Audio Setup Analog Audio Setup Analog Audio Setup Analog Audio Setup
When the disc has Dolby Pro Logic
stereo, you can choose LT/RT (Left/
Right audio) or Stereo or 3D Surround
(Virtual Surround Sound) mode to play
this disc.
Š
SPDIF Setup SPDIF Setup SPDIF Setup SPDIF Setup SPDIF Setup
SPDIF Off......Turns off the SPDIF
output.
SPDIF RAW..If you have connected
your digital out.
SPDIF PCM..If your receiver is not
capable of decoding multi-channel
audio.
Š
Dolby Digital Setup Dolby Digital Setup Dolby Digital Setup
Dolby Digital Setup Dolby Digital Setup
Stereo......Left channel is output from
the left speaker, and right channel is
output from the right speaker.
L-MONO..Left channel is output from
the front left and right speakers.
R-MONO..Right channel is output from
the front left and right speakers.
Š
3D Processing 3D Processing 3D Processing 3D Processing 3D Processing
This setting provides following sound
effects: Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena and Church.
Š
HDCD HDCD HDCD
HDCD HDCD
When playing a HDCD disc, the audio
output width degree can be set here.
Š Š Š Š Š Component
Component Component Component Component
Sets the video output according to
your video connection. This setting is
not required if you are using the
VIDEO OUTPUT jack (yellow) to
connect the DVD micro system to
your TV.
S-Video --- Select this if you have
connected the DVD micro system to
your TV using S-Video jack.
Pr/Cr Pb/Cb Y --- Select this if you
23