Atlantis Land WebShare A02-RA11 User Manual page 58

The following table describes the labels in this screen.
Label
Start Port No.
End Port No.
IP Address
Let's say you want to assign ports 22-25 to one server, port 80 to another and
assign a default server IP address of 192.168.1.35 as shown in the next figure.
Description
Enter a port number in this field.
To forward only one port, enter the port number again in the
End Port No. field.
To forward a series of ports, enter the start port number here
and the end port number in the End Port No. field.
Enter a port number in this field.
To forward only one port, enter the port number again in the
Start Port No. field above and then enter it again in this field.
To forward a series of ports, enter the last port number in a
series that begins with the port number in the Start Port No.
field above.
Enter your server IP address in this field.
A02-RA111 / A02-RA141
WebShare 111/141
Pag. 49