Connecting Dvd-Vcr To The Tv Using The S-Video Cable; Av Receiver Connections - Toshiba SD-16VBSB User Manual

SD-16VBSB/TSB-eng1 3/10/05
Connecting DVD-VCR to
the TV using the
S-Video Cable
You will enjoy high quality images. S-Video seperates
the picture element into black and white(Y) and
colour(C) signals to present clearer images than regular
video input mode.
1
Connect one end of the S-Video cable into the
S-VIDEO output jack on the rear of the DVD-VCR.
2
Plug the other end of the S-Video cable into the
appropriate input connector on the television.
3
Connect one end of the audio cables into the
AUDIO LINE output jacks on the rear of the DVD-
VCR.
• Take care to respect the colour coding of the left
and right channels.
4
Plug the other end of the audio cables into the
appropriate input connectors on the television.
Use the S-Video connection method only for
the DVD.
Note
12 - English
10:12 AM Page 12
3
1
4
2
AV Receiver
Connections
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
If your A/V receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the DVD-VCR's
built-in Dolby Digital Decoder. Use the Digital Audio Out
connection below.
1
Connect a Digital Audio coaxial cable from the
Digital Audio Out jacks on the panel of the DVD-
VCR to their corresponding Digital Audio Input
jacks on your A/V Receiver:
Digital Audio out
Jack
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2, DTS,
Digital Decoder