Connection Tab - Siemens Gigaset USB Adapter DECT Operating Instructions Manual

Configuration

Connection tab

Connecting the Gigaset USB Adapters DECT to the PC
Serial port:
Status:
No automatic
detection at program
start-up
Data/wireless connection
Connection partner:
Field strength: /
Quality:
Radio link status:
Data link status
12
The Gigaset USB Adapter will look for a free COM port for
connection. Manual changing of the setting is only
necessary where several USB adapters are connected to the
same PC/Laptop.
Configuration state, once the port was found. If no port is
found, the field remains empty.
Select this option only if more than one Gigaset USB Adapter
is connected. Then select a COM port in the upper pane.
After successful registration, you will find the name of the
connected base station here. If several base stations have
been registered, select the base station your Gigaset USB
Adapter is to set up a connection to.
If your Gigaset USB Adapter has set up a connection to a base
station, this field will show a bar diagram reflecting the
reception strength and quality of the connection. If no
connection is made, the fields remain empty.
Depending on the surroundings, the range for wireless
connection between local and partner station outdoors is
approx. 300 m, indoors approx. 50 m.
With an open connection, you will see Connection set up
here. If no connection is made, the No connection field
remains empty.
With an open connection, you will see Connection set up
here. If no connection is made, the unknown remains
empty.