Related Manuals for Siemens Gigaset M34 USB
Summary of Contents for Siemens Gigaset M34 USB
- Page 1 M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / cover_front.fm / 27.04.2006 User Manual...
-
Page 2: Table Of Contents
Status displays for the Gigaset M34 USB ........ - Page 3 M34 fuer USA LBA/ USA EN / A31008-M403-R101-3-7619 / gigaset_manual_m34_eng_v1_0IVZ.fm / 27.04.2006 Contents Glossary ........26 Appendix .
-
Page 4: Congratulations
1-888-777-0211 9 a.m. to 8 p.m. Central Standard Time Monday-Saturday www.siemens.com/gigaset Register now! Register today for the world of Siemens mobile on „gigaset.siemens.com“ and stay current with customized information on Siemens latest products and applications. Please go to: http://www.siemenscordless.com/register/... -
Page 5: For Your Safety
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Sicherheitshinweise.fm / 27.04.2006 For your safety For your safety ì Before installing the Gigaset M34 USB PC adapter and software, carefully read the following information: "Notes on the operating instructions" on page 5 "Safety precautions" on page 6... -
Page 6: Safety Precautions
– Allow the liquid to drain out of the device, and then pat all parts of the device dry. – Store the Gigaset M34 USB in a warm, dry place for at least 72 hours. In many cases, you will then be able to use it again. -
Page 7: Trademarks
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Sicherheitshinweise.fm / 27.04.2006 For your safety Trademarks Windows 2000, Windows XP, Outlook, Windows Media Player and Windows Explorer are registered trademarks of the Microsoft Corporation. Acrobat is a registered trademark of Adobe Systems Incorporated. Yahoo! is a registered trade mark of Yahoo! Communications USA Inc. -
Page 8: Installing The Software And Device Drivers
System requirements In order to be able to use the full range of functions, the following minimum require- ments must be met for installation of the Gigaset M34 USB and software: Gigaset products Base station and handset A Gigaset S450 or S455base station. -
Page 9: Minimum Pc Requirements
It is necessary that you are logged in as a user with administration rights. Contact your system administrator for details if necessary. Pack contents 1 Gigaset M34 USB PC adapter 1 USB extension cable 1 CD-ROM containing software and comprehensive operating instructions... -
Page 10: Installing The Gigaset M34 Software
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Installieren.fm / 27.04.2006 Installing the software and device drivers Installing the Gigaset M34 software When the software has been installed successfully please do not plug in the device until the Setup Wizard prompts you to do so. ì... -
Page 11: Installing The Software
ì After installation of the software components, click on Finish to confirm completion of the installation procedure. You then need to reboot your PC. You can only set up the Gigaset M34 USB PC adapter after rebooting. ì Click on Yes to reboot the PC. -
Page 12: Installing The Device Drivers
Installing the device drivers After restarting, installation is continued automatically. You are prompted to connect the Gigaset M34 USB PC adapter to the PC and the driver software is then installed. Later, you should register the Gigaset M34 USB PC adapter on your base station and you can then use the full range of functions of the software. -
Page 13: Possible Problems During Installation
Manufacturers of these hardware components normally supply a driver update. Please contact the manufacturer of your PC. Checking successful installation After rebooting the PC, the following things indicate that the Gigaset M34 USB and soft- ware have been successfully installed: The Start menu contains two new links: –... -
Page 14: Audio Settings
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Installieren.fm / 27.04.2006 Installing the software and device drivers – Gigaset M34 USB Certain entries are only displayed when a base station is connected. The drivers may have different names depending on the Windows operating system you are using and the voice packets installed. -
Page 15: Registering A Base Station
Installing the software and device drivers Registering a base station You can register your Gigaset M34 USB on up to 6 base stations. The registered base sta- tions are saved in the software and you can then connect to one of the registered base stations as required. -
Page 16: Status Displays For The Gigaset M34 Usb
Status displays for the Gigaset M34 USB LED is constantly illuminated: Base station found; Gigaset M34 USB is ready for use. LED flashes slowly: Gigaset M34 USB is looking for the base station or no base station has been registered. -
Page 17: Operating Information
Operation with multiple devices You can register your Gigaset M34 USB PC adapter to up to 6 Gigaset base stations of type S450 and S455. It is a precondition that there is a free registration location for... -
Page 18: Configuring The Gigaset M34 Software
Configuring the Gigaset M34 software Configuring the Gigaset M34 software With the Gigaset M34 USB, you can set up your PC for operation on up to 6 base stations. Particularly when the location of the PC or laptop changes often, this provides the advantage that you only need to enter the available base stations once in the configu- ration to be able to establish a connection from those locations at any time. -
Page 19: Configuring The Gigaset M34 Software
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Konfigurieren.fm / 27.04.2006 Configuring the Gigaset M34 software Configuring the Gigaset M34 software You can make various settings in the Gigaset M34 software: change the names of your devices, register or deregister base stations, connect devices to one another, control the power management feature and update the firmware if necessary Registering a base station ì... -
Page 20: Changing Device Names
Calling the Gigaset M34 USB A connection between your handset and the Gigaset M34 USB allows you to access the PC through your handset. The requirement for this connection is that your handset is registered on the same base station as the Gigaset M34 USB. -
Page 21: Deregistering A Base Station
Break the connection by pressing the End call key on your handset. Deregistering a base station For operation with the Gigaset M34 USB, a maximum of 6 base stations can be regis- tered. If all spaces on the list are occupied, you must first deregister a base station before you can register another base station. -
Page 22: Configuring Power Management
Configuring the Gigaset M34 software Configuring power management You do not have to do without the Gigaset M34 USB functions, even if your PC is in standby mode. You can configure the Gigaset M34 software so that your PC is automati- cally activated when an internal call is received. - Page 23 Close all running applications except the Gigaset M34 software. ì Make sure that your Gigaset M34 USB PC adapter is connected to the PC. ì Click on the Firmware update option in the menu tree. The button to start the firmware update is shown in the working area.
-
Page 24: Operating The Gigaset M34 Software
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Bedienen.fm / 27.04.2006 Operating the Gigaset M34 software Operating the Gigaset M34 software When started for the first time, the Gigaset M34 software is opened with the preset view. This view is divided into the following sections: Gigaset M34 Software File Edit entry Options Help Directories... -
Page 25: Opening Help
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Bedienen.fm / 27.04.2006 Operating the Gigaset M34 software Opening Help The Gigaset M34 software provides you with various forms of help: During installation, detailed descriptions appear on the screen. There is also an online help for each component of the Gigaset M34 software. Open the appropriate component and then either click on the Help icon in the tool- bar or press the F1 key. -
Page 26: Glossary
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Glossary.fm / 27.04.2006 Glossary Glossary Access code Can be set in the base station as the access code for all outgoing calls. This is necessary, for example, on a PABX that expects 0 or 1 for opening an outside line. Answering machine (AM) An answering machine accepts calls and records voice messages. - Page 27 M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Glossary.fm / 27.04.2006 Glossary Call Waiting (CW) Feature provided by a network operator. An acoustic signal during a call indicates that another caller is waiting. You can then decide whether to accept or reject the second call.
- Page 28 M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Glossary.fm / 27.04.2006 Glossary Enquiry call You are making a call. An enquiry allows you to temporarily interrupt the call to connect to a second external or internal party. If you terminate the connection to this user imme- diately, then this was an enquiry call.
- Page 29 M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Glossary.fm / 27.04.2006 Glossary Internal calls Free calls between devices connected to the base station. Internal ringer Special ring tone on PABXs to distinguish between internal and external calls. Music on hold Playing of music or a service announcement.
- Page 30 M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Glossary.fm / 27.04.2006 Glossary Toggling Toggling allows you to switch between two external callers without allowing the wait- ing caller to listen in. VoIP (Voice over Internet Protocol) Telephone calls are no longer placed and transmitted over the telephone network but over the Internet (or other IP networks).
-
Page 31: Appendix
If trouble is experienced with this equipment, for repair or warranty information, please contact Siemens Customer Care, Tel. 1-888-777-0211. This equipment is of a type that is not intented be repaired by the Customer (user). -
Page 32: Industry Canada Information
M34 fuer USA LBA / USA EN / A31008-M403-R101-3-7619 / Anhang.fm / 27.04.2006 Appendix ensure compliance with FCC RF exposure guidelines. Industry Canada Information This device meets the applicable Industry Canada technical specifications.. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inclu- ding interference that may cause undesired operation. - Page 33 Siemens during the warranty period. A copy of the dated purchase receipt must accom- pany products returned. In the absence of a purchase receipt, the warranty period shall be one (1) year from the date of manufacture.
- Page 34 This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SIEMENS including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance,...
- Page 35 If you want to learn more about Siemens Gigasets, or for technical assistance with your Gigaset, visit our web site at http://www.siemens.com/gigaset or, please call (888) 777-0211, or for TDD access (888) 777-0209.
-
Page 36: Index
... . Change device names ..Gigaset M34 USB PC Adapter Check connection status .. - Page 37 Status displays for the ... . . Gigaset M34 USB .....
- Page 38 Issued by Siemens Home and Office Communication Devices GmbH & Co. KG Schlavenhorst 66 D-46395 Bocholt © Siemens Home and Office Communication Devices GmbH & Co. KG 2006 All rights reserved. Subject to availability. Rights of modification reserved. www.siemens.com/gigaset Ref.No.: A31008-M403-R101-3-7619...