Sony HDCAM HDW-700A Operation Manual page 111

WHT PRESET: The '!' LED lights up when the WHITE BAL
switch is to PRST.
FILTER: The '!' LED lights up when the FILTER selector is
anything but 1B.
EXTENDER: The '!' LED lights up when the lens extender is in
use (i.e., EX is ON).
FAN: The '!' LED lights up when FAN mode is anything but AT
(NORM).
60 Hz: The '!' LED lights up when field frequency is 60 Hz.
3
Turn the MIC/MENU knob to move the arrow (→) to the item you
want to set, and push the MIC/MENU knob.
The arrow (→) changes to a question mark (?).
4
Turn the MIC/MENU knob to change the desired setting, and push
the MIC/MENU knob.
The question mark (?) changes back to the arrow (→) to confirm the
setting.
5
To continue setting other items, repeat steps 3 and 4.
6
To end menu operations, turn the VF DISP switch to ON.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen.
Chapter 4 Adjustments and Settings for Recording
4 4
4-41