File; Setting The Battery, D5600K Mode And Selecting The Lens File - Sony HDCAM HDW-700A Operation Manual

4-7-8 Setting the Battery, D5600K Mode and
Selecting the Lens File
Use the BATTERY / D56 page of the OPERATION menu:
• To select the type of battery that is currently being used. (When you
change this setting, the alarm voltage automatically changes to the
value set in the MAINTENANCE menu.)
• To turn on the gain amplifier (providing an electrical equivalent of
4
5600K).
When colour temperature is high, signal to noise ratio of blue
component becomes better as compared to the correction with the CC
filter. And also when lighting is dark and colour temperature is high, it
is possible to correct colour temperature with sensitivity higher than CC
filter. When the setting is changed, it is necessary to perform
automatic white balance adjustment.
• To select the lens file to be used.
For details on the lens file setting, refer to the maintenance manual.
1
Set the VF DISP switch to MENU.
2
Turn the MIC/MENU knob until the BATTERY / D56 page appears,
and push the MIC/MENU knob.
BATT TYPE: Selects the battery
D5600K: Turns the D5600K gain amplifier on and off
LENS FILE: Selects the lens file
3
Turn the MIC/MENU knob to move the arrow (→) to the item you
want to set, and push the MIC/MENU knob.
The arrow (→) changes to a question mark (?).
4-50 Chapter 4 Adjustments and Settings for Recording