Configuring The Snmp Access Control List - Xerox ColorQube 8570 System Administrator Manual
Hide thumbs
Also See for ColorQube 8570:
- Service manual (433 pages) ,
- Manual d'utilisation (217 pages) ,
- User manual (200 pages)
Table of Contents
Advertisement
Privacy Protocol: The protocol associated with the Privacy Key; selected on the Configure SNMP
•
v3: Key User Account page.
•
Privacy Key: The privacy key defined on the Configure SNMP v3: Administrative User Account
page is displayed as a row of asterisks (*) here.
•
MIB Access: The Key User account's MIB access permissions selected on the Configure SNMP v3:
Key User Account page. MIB access for the Key User account can be set to Read or Read/Write.
Note:
SNMP Read and SNMP Write access for the Any User account must be equal to or less than
the privileges set for the Key User account.
The Any User/Driver Account Settings
•
User Name: Displays anyuser by default and cannot be changed.
•
MIB Access: Displays the Any User account's MIB access permissions selected on the Configure
SNMP v3: Other Account Settings page. Select Read or Read/Write.
•
SNMP Read: Displays a check symbol if SNMP Read access is enabled. SNMP Read access can be
enabled for the Any User account after the Key User account is created.
•
SNMP Write: Displays a check symbol if SNMP Write access is enabled. SNMP Write access can be
enabled for the Any User account after the Key User account is created.
•
Driver Account Enabled: Displays a check symbol if the Driver Account is enabled (default).
Note:
If the Driver Account is disabled, it breaks communication between the printer and any
applications using SNMP v3, such as Xerox print drivers and PrintingScout. For a complete list of
applications disabled, see
Configuring the SNMP Access Control List
To set up a list of hosts that are authorized to access the printer using SNMP:
1.
Launch a Web browser from your computer.
Enter your printer IP address in the browser Address field. For details, see
2.
Address
on page 17.
Click Properties.
3.
On the left navigation pane, select the Protocol folder.
4.
Select SNMP.
5.
6.
If prompted, enter your Admin or Key User name and password.
Enter up to 10 host IP addresses in the Host Access List field of the SNMP Access Control List
7.
box. Separate entries with a blank or a comma, specify ranges with a hyphen (-), and use an
asterisk (*) to represent a group of numbers (e.g., 13.62.156.*).
8.
Click the Save Changes button.
See also:
Access Control Lists
Disabling SNMP
on page 82.
on page 54
Finding the Printer IP
ColorQube 8570/8870 Color Printer
System Administrator Guide
Security Features
81
Advertisement
Table of Contents
