Toshiba Qosmio G30 User Manual page 125

■
If a boot command is not found on the first detected HDD, the system
will not boot from the other HDD. It will search the next device in the
boot priority for a boot command.
■
Although, generally, most models have two hard disks installed, some
models have only one hard disk. In the case of models with one hard
disk, this setting item will not be displayed.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
Network Boot Protocol is not displayed for Gigabit Ethernet LAN.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled
Disabled
CPU
This function lets you set the CPU operating mode.
This option is only displayed on models with an Intel
Processor.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
Always High
Always Low
User's Manual
[PXE] Sets PXE as the protocol (Default).
[RPL] Sets RPL as the protocol.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function
(Default).
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary
(Default).
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
HW Setup
Core™ Duo
®
7-5