Changing The Way You Are Warned; Report Button; Reporting A New Safety Camera While On The Move - TomTom GO User Manual

Changing the way you are warned

To change the way your TomTom GO warns you about safety cameras, tap
the Change warning preferences button.
You can then set how close you want to be to a safety camera before you
Change warning
are warned and what type of sound will be played.
preferences
For example, to change the sound that is played when you approach a fixed
safety camera, do the following:
1. Tap TomTom Safety Cameras in the Main Menu.
2. Tap Change warning preferences.
3. Tap Fixed safety cameras.
Tip: If you want to change the warning sounds for all camera types to a
single sound, tap <ALL> instead of Fixed safety cameras in step 4 above.
4. Tap NO to avoid removing the fixed safety camera alerts.
5. Enter the time in seconds for when a warning is given before you reach
6. Tap the sound you want to be used for the warning. For example, to
7. Tap YES to save your changes.

Report button

To show the report button in the Driving View, do the following:
1. Tap TomTom Services in the Main Menu.
2. Tap TomTom Safety Cameras.
3. Tap Enable report button.
The report button is shown on left-hand side of the Driving View or if you
are already using the quick menu, it's added to the buttons available in the
quick menu.

Reporting a new safety camera while on the move

To report a safety camera while you are on the move, do the following:
1. Tap the report button shown in the Driving View or in the quick menu to
record the location the camera.
2. Tap Mobile camera or Fixed camera.
If you tap Fixed camera, you then need to say which side of the road the
camera is located and if known, the type of camera.
A list of safety camera types is displayed. A speaker is shown next to the
speed camera types that have been set for an alert.
a camera. Then tap OK.
select a bugle sound tap on Bugle.
84