Sharp AR-208S Online Manual page 21

3 SCAN
Scanning from a TWAIN-Compliant Application
4
Select "Acquire Image" from the "File" menu, or
click the "Acquire" button (
The scanner driver setup screen will appear.
☞
Scanner Driver Settings
5
In the "Scanning Position" menu, select the
location where you placed the original in Step 1.
● If you placed a one-sided original in the RSPF, select
"SPF (Simplex)".
When using the RSPF:
● If you placed a two-sided original in the RSPF, select
"SPF (Duplex-Book)" or "SPF (Duplex-Tablet)"
according to the binding position of the original.
If you selected "SPF (Duplex-Book)" or "SPF
Note
(Duplex-Tablet)" in the "Scanning Position" menu, select
whether the orientation of the placed original is "Right
edge is fed first" or "Top edge is fed first".
CONTENTS
).
I N D E X
6
Click the "Preview" button.
The preview image will appear.
● If the angle of the image is not correct, reset the
Note
original, and click the "Preview" button again.
● If the preview image is not oriented correctly, click the
"Rotate" button in the preview screen. This rotates the
preview image 90 degrees clockwise, allowing you to
correct the orientation without resetting the original.
☞
Preview screen
●
If you set multiple pages in the RSPF, the machine
previews only the top page of the originals, and then
sends it to the original exit area. Return the previewed
original to the RSPF before starting the scanning job.
(part 2)
21