Assembly; Features - Ryobi CRO1800 Operator's Manual

KNOW YOUR SANDER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ON/OFF SWITCH
The ON ( I ) / OFF ( O ) switch is located on the front of the
tool.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1300 361 505 for assistance.
PACKING LIST
Sander
Sanding Disc, 60-grit
Sanding Disc, 120-grit
Sanding Disc, 240-grit
Operator's Manual

FEATURES

ORBITAL SANDING ACTION
The oscillating action of your sander produces a very quick,
small circular motion of the sanding pad. The motion is ideal
for producing a fi ne fi nished grain.
QUICK CHANGE HOOK-AND-LOOP PAD
The hook-and-loop design allows for quick change of
sanding sheets. It also enables you to easily clean and
reuse them.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modifi cation is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
9