Ryobi CRO1800 Operator's Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Sander
  5. CRO1800
  6. Operator's manual
Ryobi CRO1800 Operator's Manual

Ryobi CRO1800 Operator's Manual

18 volt random orbit sander
Hide thumbs
Table of Contents

Advertisement

Quick Links

Your sander has been engineered and manufactured to our high standard for dependability, ease of operation and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
18 VOLT RANDOM ORBIT SANDER
CRO1800
BATTERIES AND CHARGERS
SOLD SEPARATELY

Advertisement

Table of Contents
loading

Related Manuals for Ryobi CRO1800

Summary of Contents for Ryobi CRO1800

  • Page 1 When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Ryobi product. SAVE THIS MANUAL FOR FUTURE REFERENCE...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Introduction ..................................2 General Safety Rules ..............................3-4 Specifi c Safety Rules ............................... 4 Safety Rules for Charger ..............................5 Symbols ..................................6-7 Features ..................................8-9 Assembly ..................................9 Operation .................................. 10-13 Maintenance .................................. 14 Parts Ordering / Service ............................ Backpage INTRODUCTION This product has many features for making its use more pleasant and enjoyable.

  • Page 3: General Safety Rules

    Use battery only with charger listed. of starting the power tool accidentally. MODEL BATTERY PACK CHARGER Store idle power tools out of the reach of children and CRO1800 ABP1801 ACR1800 do not allow persons unfamiliar with the power tool or ABP1802 or ACC1800 or these instructions to operate the power tool.

  • Page 4: Specifi C Safety Rules

    GENERAL SAFETY RULES Use the power tool, accessories and tool bits etc., in connection from one terminal to another. Shorting the accordance with these instructions and in the manner battery terminals together may cause burns or a fi re. intended for the particular type of power tool, taking Under abusive conditions, liquid may be ejected from into account the working conditions and the work the battery, avoid contact.

  • Page 5: Safety Rules For Charger

    SAFETY RULES FOR CHARGER An extension cord should not be used unless WARNING! absolutely necessary. Use of improper extension cord could result in a risk of fi re and electric shock. If extension READ AND UNDERSTAND ALL INSTRUCTIONS. cord must be used, make sure: Failure to follow all instructions listed below, may result in a.

  • Page 7: Symbols

    If you servicing, use only identical replacement parts. do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service on 1300 361 505 for assistance. WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage.

  • Page 8: Features

    FEATURES PRODUCT SPECIFICATIONS Charger Input ........240 V, 50 Hz, AC only Orbit Diameter ............1.6 mm Charge Rate ............60-90 min Motor ..............18 Volt DC Pad Size ..............125mm No Load Speed ........10,000 r/min. (RPM) ON ( I ) / OFF ( O ) SWITCH HOOK-AND-LOOP SANDING DISCS Fig.

  • Page 9: Assembly

    FEATURES KNOW YOUR SANDER ORBITAL SANDING ACTION See Figure 1. The oscillating action of your sander produces a very quick, The safe use of this product requires an understanding of the small circular motion of the sanding pad. The motion is ideal information on the product and in this operator’s manual as for producing a fi...

  • Page 10: Operation

    OPERATION NOTE: Batteries will not reach full charge the fi rst time they WARNING: are charged. Allow several cycles (operation followed by recharging) for them to become fully charged. Do not allow familiarity with products to make you CHARGING A COOL BATTERY PACK careless.
  • Page 11 OPERATION CHARGING A HOT BATTERY PACK When using the product continuously, the batteries in the BATTERY PACK CHARGER battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the green LED to come on instead of the red LED.
  • Page 12 OPERATION TO INSTALL BATTERY PACK DEPRESS LATCHES TO BATTERY See Figure 4. RELEASE BATTERY PACK PACK Place the battery pack on the tool. Make sure the latches on each side of the battery pack snap into place and the battery pack is se cured on the tool before beginning operation.
  • Page 13 OPERATION OPERATING THE SANDER See Figure 6. Secure the workpiece to prevent it from moving during operation. WARNING: Unsecured workpieces could be thrown towards the operator causing injury. WARNING: Keep your head away from the sander and the sand ing area.

  • Page 14: Maintenance

    MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of When servicing, use only identical replacement parts. commercial solvents and may be damaged by their use. Use Use of any other parts may create a hazard or cause clean cloths to remove dirt, dust, oil, grease etc.

Table of Contents