Ryobi ERT1250VN Owner's Operating Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Power Tool
  5. ERT1250VN
  6. Owner's operating manual
Ryobi ERT1250VN Owner's Operating Manual

Ryobi ERT1250VN Owner's Operating Manual

Plunge router
Hide thumbs Also See for ERT1250VN:

Advertisement

Table of Contents

2
OPERATING
DOUBLE
INSULATED
N197
THANK YOU FOR BUYING A RYOBI PLUNGE ROUTER
Your new plunge router has been engineered and manufactured to Ryobi's high standard for dependability,
ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free
performance.
CAUTION: Carefully read through this entire owner's manual before using your
plunge router.
Pay close attention to the Rules for Safe Operation, Warnings and Cautions.
If you use your plunge router properly and only for what it is intended, you will enjoy years of safe, reliable
service.
Thank you again for buying Ryobi tools.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading

Related Manuals for Ryobi ERT1250VN

Summary of Contents for Ryobi ERT1250VN

  • Page 1 THANK YOU FOR BUYING A RYOBI PLUNGE ROUTER Your new plunge router has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.

  • Page 6: General Safety Rules

    GENERAL SAFETY RULES ■ SAVE THESE INSTRUCTIONS Avoid accidental starting. Be sure switch is off WARNING: before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch Read and understand all instructions. Failure on invites accidents.

  • Page 7: Specific Safety Rules

    GENERAL SAFETY RULES SERVICE ■ Only use cutters of the correct shank diameter and ■ Tool service must be performed only by qualified repair which are suitable for the speed of the tool. personnel. Service or maintenance performed by ■ Use only accessories that are recommended by unqualified personnel could result in a risk of injury.

  • Page 8: Specifications

    SPECIFIC SAFETY RULES your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. SPECIFICATIONS Voltage : 240V ~ 50Hz Collet size : 6.35mm or 12.7mm No load speed : 14000-31500min...

  • Page 9: Electrical Connection

    FEATURES PLUNGE LOCK LEVER SHOWN AFTER VARIABLE SPEED EXTENDED WEAR (FIG. 20) Your router has advanced electronic features, designed to PLUNGE LOCK LEVER SHOWN IN ORIGINAL assist you in getting the maximum use from your router. LOCKED POSITION (FIG. 22) By making proper speed selections, your router can be adjusted to specific routing needs.
  • Page 10 FEATURES WARNING: technician. For service, we suggest you return the tool to your nearest authorized service center for repair. The double insulated system is intended to WARNING: protect the user from shock resulting from a break in the tools internal wiring. Observe all Do not attempt to modify this tool or create normal safety precautions to avoid electrical accessories not recommended for use with...

  • Page 11: Operation

    ADJUSTMENTS horsepower of router motor, type of cutter being used and VARIABLE SPEED CONTROL SELECTOR type of wood being routed. A lightweight, low horsepower (FIG. 10) router is designed for making shallow cuts. A router with Your router has a variable speed control selector (2) high horsepower rating can safely cut deeper.
  • Page 12 OPERATION router. When using your router hold it firmly with both ■ Postion the router on the cutting line. The outer cutting hands. edge of the cutter must coincide with the cutting line. Before starting the router, unplug it and make sure the ■...
  • Page 13 OPERATION ■ Let motor build to full speed, then gradually plunge FINE HEIGHT ADJUSTER (32) cutter into workpiece until stop bar comes into contact It is used to precisely control the depth of the cutter. with depth stop. ■ To use the fine height adjuster, ensure that the ■...

  • Page 14: Maintenance

    MAINTENANCE WARNING: LUBRICATION When servicing use only identical Ryobi replace- All of the bearings in this tool are lubricated with a sufficient ment parts. Use of any other parts may create a amount of high grade lubricant for the life of the unit under hazard or cause product damage.
  • Page 15 RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 27 Clemow Drive, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.

Table of Contents