Table of Contents
Advertisement
Preparations for using the RPC-1
Windows 2000
1. Start up your computer after installing the RPC-1.
2. In order to install the RPC-1 driver, you must be logged
onto the system as Administrator. For details, contact
your system administrator.
3. The RPC-1 will be detected automatically, and the
"Found New Hardware Wizard" will start up. Click
"Next."
4. Check "Search for a suitable driver for my device"
and click "Next."
5. The message of "Insert the manufacturer's installation
disk into the drive selected, and then click OK"
appears.
6. Into your CD-ROM drive, insert the "Drivers/Update"
CD-ROM that was included with the RPC-1 and click
"OK."
7. Specify the location of the driver information file. The
RPC-1 driver file is located in "CD-ROM
drive(ROLAND_ RPC-1) > DRIVERS folder > WDM
folder." Select "RolandRPC-1.inf" in the above folder
and click "Open."
8. Click "OK."
9. When the message of "Driver Files Search Results:
The wizard has finished searching for driver files for
your hardware device" appears, click "Next."
10. Click "Yes" if the message of "Digital signature Not
Found......." appears.
11. The installing will start up.
12. When the message "Completing the Found New
Hardware Wizard : Roland RPC-1" appears, click
"Finish."
13. Windows 2000 will start up.
8
Windows XP
1. Start up your computer after installing the RPC-1.
2. In order to install the RPC-1 driver, you must be logged
onto the system as Administrator. For details, contact
your system administrator.
3. The RPC-1 will be detected automatically, and the
"Found New Hardware Wizard" will start up.
4. Into your CD-ROM drive, insert the "Drivers/Update"
CD-ROM that was included with the RPC-1.
5. Click "Yes" if the message of "Digital signature Not
Found......." appears.
6. The installing will start up.
7. When the message "Completing the Found New
Hardware Wizard : Roland RPC-1" appears, click
"Finish."
8. Windows XP will start up.
Windows NT4.0
1. In order to install the RPC-1 driver, you must be logged
onto the system as Administrator. For details, contact
your system administrator.
2. Into your CD-ROM drive, insert the "Drivers/Update"
CD-ROM included with the RPC-1.
3. From the "Start" menu, select "Settings," and open the
"Control Panel."
4. Double-click "Multimedia."
5. Click "Devices," and click "Add."
6. Select "Unlisted or updated driver," and click "OK."
7. When the driver installation window appears, click
"Browse," and select the CD-ROM drive. Select the
"WINNT" folder under "DRIVERS" folder, and click
"OK."
8. Select "Roland RPC-1 Interface Card" in the "Add
unlisted or updated driver" window. Click "OK."
9. When installation is finished, a message will ask you to
restart the system. Click "Restart Now" to restart the
system.
Advertisement
Table of Contents
