Getting Started - SENDO S251 User Manual

Table of Contents

Advertisement

3

Getting started

To use your phone, you must first insert the
SIM card supplied by your service provider,
and then charge the battery.
Removing the back cover
Inserting the SIM card
Place the SIM in the phone, starting with the
right side first, making sure that the golden
contacts of the card are touching the
contacts of the phone. Hold the SIM card in
place and slide the metal plate to the right,
in order to cover the left hand side of the SIM
card.
Press down on the
area below the clip and
slide the cover back.
Lift off.
Note: Keep all SIM cards out of small
children's reach. The SIM card is easily
damaged by scratches or bending, so
be cautious when inserting and
removing the card.
Fitting the battery
Insert the battery with the label facing down.
Align the tabs on the battery with the tabs on
the back of the phone. Clip into place. To
remove press on the clip and lift the battery
out.
1
You must charge the battery for at least
12 hours before using the telephone for
the first time.
2
Allow your battery to fully discharge
occasionally before recharging it.
3
When the battery is completely
discharged it may take some time for the
battery charging icon to appear after you
have connected the charger.
7
3

Advertisement

Table of Contents
loading

Table of Contents