Getting Started - SENDO 300 User Manual

3

Getting started

3
To use your phone, you must first insert the
SIM card supplied by your service provider,
and then charge the battery.
ζ
Note: You cannot insert or remove the
SIM unless you remove the battery. If
you need to remove the battery, press
down on the tab at the centre of the
bottom edge of the battery and lift out.
ζ
Note: Always turn your phone off before
you insert or remove the battery.
Removing the back cover
Press down on the area on the top of the
back cover, slide the cover down and lift off.
Inserting the SIM card
Slide the SIM into place, starting with the
shorter edge first, making sure that the gold-
coloured contacts of the card are touching
the contacts of the phone.
ζ
Warning: Keep all SIM cards out of small
children's reach. The SIM card is easily
damaged by scratches or bending, so
be cautious when inserting and
removing the card.
6