Using The Contact List - SENDO J530 User Manual

5

Using the contact list

5
The names and numbers you enter into your contact list are stored on the SIM card.
To access your contact list entries, press
Storing a name and number
d
1 Press ,
screen.
2 Use the up and down keys
scroll to the
g
, Select.
3 Enter the area code and phone number,
then press
Enter the name you wish to store in the
4
contact list, then press
keypad as explained in the table in the
Messages section to enter the characters
and to switch between lower case, upper
case, and numeric modes.
5 Enter the chatname that you wish to
assign to the contact.
6 If you wish, a voice tag may be recorded
to enable voice dialling of that contact in
the future. Press
hear the beep, speak the name of the
contact into the microphone. Refer to the
explanation opposite.
Correcting an entry
c
Pressing deletes the character
immediately to the left of the cursor.
Pressing and holding
text that you have entered.
Contacts from the main
:
and
Add new option, then press
g
, OK.
g
, OK. Use the
g
, Yes and when you
c
deletes all of the
;
from the main screen.
Contact list options
When you have selected a name you can
open a list of options by pressing
Options which will allow you to change,
;
to
delete, give details and send a message.
Adding a voice tag
Before a contact can be dialled using voice
dialling it must have a voice tag assigned to
it. To add a voice tag to an existing contact
first select the contact and press
Options. Use the :; keys to scroll down
the sub-menu to
Select Twice. When you hear a beep speak
the name of the contact into the
microphone.
Voice tag options
When you have selected a contact with a
voice tag assigned to it press
Using the :; keys select
g
press
change, play or delete the voice tag.
Stored Tags
To see how much memory is available for
voice tags press
main screen and select
8
Voice Tag and press
d
Voice Tag
, Select which will allow you to
d
, Contacts
Stored
d
,
d
,
g
,
, Options.
and
from the
tags.