Setting The Groups - Sharp TM100 Operation Manual

Setting the Groups

You can set group icons when saving the "Contacts list"
entries so that you can easily find and edit them.
Viewing Groups
1
At the main menu, select in the following order:
"Contacts" → "Contacts list."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Group" and press B.
4
Press a or b to highlight "View groups" and
press B.
5
Press a or b to highlight the group name you
wish to view and press B.
The check box indicates that the group has been
selected.
To cancel the selected group, press B again. The
checkbox becomes blank again.
In step 5, press C [Options] to display the
"Options" menu and select "Select current only" to
view only the selected group or "Select all" to view
all groups.
9-58
Group Call
You can set different ringtones for each group. When you
purchase this handset, groups are set to off. If you do not
set a group ringtone, the ringtone assigned in the
"Profiles" is used. For information on the "Profiles," refer
to "Setting the Profiles" on page 15-128.
1
At the main menu, select in the following order:
"Contacts" → "Contacts list."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Group" and press B.
4
Press a or b to highlight "Group call" and press
B.
5
Press a or b to highlight the group name you
wish to set and press B.
6
Press a or b to highlight "On" and press B.
If you wish to cancel the ringtone setting, select "Off"
in this step.
7
Press a or b to highlight "Assign melody" and
press B.