HOW TO SET THE TIME AND CALENDAR
● If there is any time difference between the factory default time settings and
the local time in your area, reset the time and calendar before initially using
the watch after purchase.
● In a case that the watch is completely stopped due to a shortage of stored
electrical energy, recharge the watch until the second hand resumes the
normal one-second interval movement, and then reset the time and calen-
dar. (Refer to "IF THE SECOND HAND STARTS MOVING AT TWO-SECOND
INTERVALS" on page 18.)
■ HOW TO SET THE TIME
1. Pull out the crown to the second click. The second hand will be stopping on the spot.
✽
If your watch has a screw lock type crown, unscrew the crown first, and then pull it out to
the second click.
✽
To set the second hand exactly, pull out the crown to the second click at a moment the
second hand is pointing to the 12 o'clock (" 0 " second) position.
[Cal. 7D46]
12
Second click position
Original position
[Cal. 7D48]
Original position
Second click position