Seiko KINETIC 7D46 Instructions Manual page 11

Notes
✽ If there is any time difference between the factory default time settings and the local time
in your area, reset the time and calendar before initially using the watch after purchase.
✽ While the watch is in power save mode, the built-in IC computes the time internally at an
accuracy of 15 seconds per month which is equivalent to the accuracy of conventional
quartz watches. Therefore, the time relayed from the built-in IC to the hands by the
automatic time relay function may include a certain amount of time loss or gain within the
range of the accuracy of the watch ( 15 seconds per month.) In such a case, reset the time
as needed before starting to wear the watch.
✽ When the watch wakes up from power save mode while it is running on extremely low
electrical power, the second hand starts moving at two-second intervals. (Refer to " IF THE
SECOND HAND STARTS MOVING AT TWO-SECOND INTERVALS" on page 18. )
11