Agency Certification; Safety Certification; Electromagnetic Compatibility - Seagate ST400FM0012 Product Manual

2.13

Agency certification

2.13.1

Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so
marked as to the certify agency.
2.13.2

Electromagnetic compatibility

Drives that display the CE mark comply with the European Union (EU) requirements specified in the Electro-
magnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the lev-
els specified by the product standards for Information Technology Equipment (ITE). Emission levels are
defined by EN 55022, Class B and the immunity levels are defined by EN 55024.
Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous
paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply
with the directives when used in the test systems, we cannot guarantee that all systems will comply with the
directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O
cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators
should confirm EMC compliance and provide CE marking for their products.
Korean KCC
If these drives have the Korean Communications Commission (KCC) logo, they comply with KN22 and
KN61000.
Australian C-Tick (N176)
If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ
CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian
Communication Authority (ACA).
Pulsar.2 Product Manual, Rev. A 21