Removal steps of speaker assembly
Step
Screw (quantity)
2
M2 × 5 mm, wafer-head, nylon-coated, big head (4)
When installing: Attach the speaker assembly and route the cable as shown in the following illustration, and
ensure that the speaker connector is attached firmly.
1120 I/O sub card with USB connector
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 Bottom slot cover" on page 57
•
"1070 Keyboard" on page 66
•
"1090 Keyboard bezel" on page 68
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 9
Removing or replacing a FRU
71