1190 Base Cover Assembly, I/O Sub Card With Usb Connector And 1394 Connector, And I/O Sub Card Cable - Lenovo ThinkPad T410i Hardware Maintenance Manual

Removal steps of CPU
Rotate the head of the screw in the direction shown by arrow
When installing: Place the CPU on the CPU socket, and then rotate the head of the screw in the direction
3
shown by arrow to secure the CPU.
Note: Before you install a new CPU, apply the insulation sheet on the CPU, on the parts marked
shown in the drawing.
1190 Base cover assembly, I/O sub card with USB connector and 1394
connector, and I/O sub card cable
For access, remove these FRUs in order:
• "1010 Battery pack" on page 66
• "1020 ExpressCard blank bezel" on page 67
• "1030 Serial Ultrabay Slim device or travel bezel" on page 68
• "1040 Hard disk drive (HDD) and solid state drive (SSD)" on page 69
• "1050 DIMM slot cover" on page 70
• "1070 PCI Express Mini Card for wireless WAN" on page 72
• "1080 Keyboard" on page 74
• "1110 PCI Express Mini Card for wireless LAN" on page 81
• "1120 Keyboard bezel assembly, FPC cable, and Bluethooth daughter card (BDC-2.1)" on page 83
• "1150 Speaker assembly" on page 89
• "1160 LCD unit" on page 91
• "1170 Fan assembly" on page 95
1
to release the lock, then remove the CPU
.
Chapter 8 Removing and replacing a FRU
2
.
a as
99