External Cleaning; Prolonged Periods Of Non-Operation; Frost Precautions; Moving The Machine - Zanussi ZTI 6100 Instruction Book

Table of Contents

Advertisement

Check that the SID is not clogged with detergent
residue. If necessary rinse it under running water after
having removed it from the basket by twisting it
anticlockwise and pulling it upwards.
Fasten it back onto the support by turning it clockwise.
Never use your dishwasher without the SID
dispenser.
Since SID also ensures correct distribution
of the water to the upper spray arm, running
the dishwasher without it will impair the
washing results.

External cleaning

Clean the external surfaces of the machine and
control panel with a damp soft cloth. If necessary use
only neutral detergents. Never use abrasive products,
scouring pads or solvent (acetone, trichloroethylene
etc....).

Prolonged periods of non-operation

If you are not using the machine for any period of
time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of
any unpleasant smells.
4. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable, empty
the machine, close the appliance door, disconnect the
water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
MA12
43
MAN07en

Advertisement

Table of Contents
loading

Table of Contents