Description Of The Controls - Smeg Dishwasher Instruction Manual

User instructions

3. Description of the controls

3.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
2
end
Auto
60°-70°
ON/OFF BUTTON
1
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
2
Illumination of this light denotes the program selected and the
occurrence of a fault (troubleshooting).
PROGRAM SELECTION BUTTON
3
By pressing this button in sequence it is possible to select the desired
program.
SALT WARNING LIGHT
4
Illumination of this light signals that salt container is empty.
RINSE AID WARNING LIGHT
5
Illumination of this light signals that rinse aid dispenser is empty.
EXTRA PROGRAM BUTTON
6
This button gives access to the one of the five extra programs (see
table).
EXTRA PROGRAM LIGHT
7
Illuminates to indicate that one of the five extra programs (see table) is
going to be executed.
3 4 5 11 10 7 6 9 8 13 12 1
3/1
11